MSG6100 pressure transmitter

Product Features	Using silicon piezoresistive sensor sensitive components originating from the United States, the basic performance and quality of the product are more guaranteed, and the full range of product combinations are available
	Multi grade and multi variety specifications, with wide applicability. The new modular structure design further enhances reliability and economy.
	Utilize more intelligent technology to improve product performance and functionality. Suitable for micro pressure, high pressure, high temperature, low temperature, and corrosive conditions
	Pressure measurement.

working principle	Using semiconductor planar process technology to fabricate resistance bridges on silicon wafers. The medium pressure is suitable for metal diaphragm plates to produce displacement,
	Transfer pressure to the resistance bridge circuit through an intermediary fluid. The resistance bridge circuit will output a linear relationship with the pressure signal when subjected to pressure
	The voltage signal of the system is further processed by electronic components and converted into a standard signal output.

---

---

Technical Specifications	·Measurement range	Relative pressure: minimum measurement range 0-1KPa; Maximum measurement range 0-70MPa
		Absolute pressure: minimum measurement range 0-35KPa; Maximum measurement range 0-70MPa
		Negative relative pressure: minimum measurement range -1 to 0KPa; Maximum measurement range -0.1 to 70MPa
	·Measurement accuracy	simulation type
		The comprehensive error (including linearity, repeatability, and hysteresis) is better than ± 0.5% FS and ± 0.2% FS
		intelligent type
		1: 1~10:1 range ratio of 0.1% set range;
		10: 1~20:1 range ratio (0.05%+0.005% × TD)% set range
	·Temperature range	Allowable medium temperature -40 to+120 ℃; Allow ambient temperature of -40 to+85 ℃
		Isolation membrane structure high temperature type 400 ℃; Isolation membrane structure low temperature type -80 ℃
		Allowable storage temperature -40~85 ℃
	·Sensors allow for overvoltage	Rated range 3 times pressure
	·Power supply	12～36V DC
	·Long term stability	Better than 0.1% F.S per year; 5 years better than 0.25% F.S
	·Temperature influence	MSG6100 analog type -20 ℃~+60 ℃ relative to 25 ℃ ≤± 0.6% standard range
		MSG6100 intelligent type -40 ℃~+85 ℃ performance for 25 ℃ ≤± 0.5% standard range
	·Damping	Intelligent 0-40s continuous adjustable; Simulated 0/2S
	·Anti vibration	2g 1000HZ±0.05%g
	·Impact resistance	50g 11mesc
	·Allow environmental humidity	Relative humidity 100% RH
	·Signal output	Analog 4-20mA two-wire system
		Intelligent 4-20mA two-wire system with HART communication function
		Zero point minimum alarm current range: 3.7mA
		Meet the maximum alarm current range: 22mA
	·Start time	3S without preheating required
	·Sensor filling fluid	Silicone oil, anaerobic oil
	·Contact with medium	Process connector: Stainless steel 304, stainless steel 316L
	Partial materials	Sensor diaphragm: stainless steel 316L Hastelloy C
	·Material of non-contact parts with the medium	The weight of the epoxy resin coating on the die cast aluminum strip of the shell is about 1kg
	·On site display terminal	Intelligent 5-digit LCD digital display terminal
		Analog 3 1/2 LCD digital display terminal
	·Protection level	IP66
	·Explosion proof grade	Explosion proof Ex d Ⅱ C T6 Gb; Intrinsically safe Ex ia Ⅱ C T6 Ga

external structure

load characteristic

electrical connection

M4 screw terminal block is suitable for 0.5-2mm ² wire diameter, M20 × 1.5 internal thread cable entry hole,

Cable sealing sleeve is used for cables with an outer diameter of 6-8mm.

Installation method

Product Features	Adopting a diffusion silicon sensor with an oil filled welded sealing diaphragm structure and multiple process connection methods,
	specialMaterial film, inherently safe, explosion-proof, suitable for hygiene, cleanliness, high temperature, low temperature
	WarmrotMeasurement of pressure under corrosion conditions.

Order Selection Table