Magnetic float level (boundary) transmitter level gauge

1UHZ-518BThe detection tube of the series liquid level transmitter is equipped with a reed switch and a precision resistor. When the magnetic float outside the tube changes with the liquid level, the reed switch located at the liquid level in the detection tube is sequentially connected to change the resistance value of the transmitter. The conversion circuit module in the junction box converts its resistance value into a current output signal of 4-20mA. The power supply is 24VDC, with an accuracy of 10mm, which is easy to debug and economical and practical.

IIMagnetic float level (boundary) transmitter level gauge

Product features

The working principle is simple, but it has a wide range of applications;

● For continuous measurement of liquid, it can reliably and stably obtain liquid level signal, and is not affected by changes in physical and chemical state of the measured medium, such as foam, conductivity,

Dielectric constantPressure, vacuum, temperature, evaporation, formation of bubbles, boiling, density changes, etc;

Easy to install, calibrated once before use, no further work required in the future;

The liquid level signal of the container's liquid level and interface volume can be displayed proportionally;

● Long distance transmission of signals;

Good repeatability;

● Can perform interface measurement with a density difference of ≥ 50Kg/m3;

Applicable range: Temperature -80~100 ℃;

● Vacuum pressure to 10Kpa;

● Density ≥ 400Kg/m3;

Strong corrosion resistance, suitable for various industrial applications: chemical, petrochemical, natural gas, pharmaceutical, offshore exploration, shipbuilding, power plants,

Power plant machine manufacturing industry, purified water purification equipment, drinking water purification equipment, beverage and food industry.

3、 Magnetic float level (boundary) transmitter level gauge

Technical Specifications:：

measurement range：300~8000mm

Accuracy± 1.5% FS (measurement range greater than 1000mm)

Power supply24VDC (15~35V) (24V power supply can be provided by our company's display instrument)
Power consumption：≤720mW

output signal4~20mADC two-wire system

pressure rating：1.6 MPa，2.5 MPa，4.0MPa，Class 150，Class 300

medium density：0.5~2g/cm3

medium viscosity：≤0.8Pas; 3Pas

Explosion-proof ratingExplosion proof type: Ex d IIBT4 Intrinsic safety type: Ex ia IICT4~T6

Protection level：IP65

Connection flange standardMade according to HG20593-97 DN100 PN1.0, 2.5, 4.0 raised face flange standards, please specify other standards by the user.