- 이메일
- 전화
-
주소
샹탄 이속하 고신구 해당대로 중간 구간
|
수평 피스톤 하역 원심분리기 주요 기술 매개변수:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
제품 구조 원리Structures and Principles The main motor drives the basket to rotate at a full speed, material being fed into through a feed pipe and distributed evenly on filter screen walls of the basket inner sect. Under the centrifugal force, the liquid is discharged out of the basket through filter screen and the holes of the basket, and then out of the machine through the tube for discharging liquid, while the solid deposits in the basket as a ring layer of cake. As the pusher plate is rotating at the same speed as the basket, it is pushed by the piston to reciprocate continuously and axially, thus pushing the cake layer to move out of the basket and then out of the machine from its front shell base. HY Series are a kind of pusher filtering centrifuge with continuous operation. They can perform feeding, separating washing and discharging in sequence at their full-speed running. This machine has the advantages of continuous operation, stable performance, easy operation, large capacity, ideal washing effect and low moisture content of cake. They can be used for separating the suspension with solid phase particle size of more than 0.1mm and with the concentration of over 40%. They are suitable for chemical industry industry, fertilizer, manufacturing salt and alkali, especially suitable for the solid-liquid separation of ammonium bicarbonate, ammonium chloride, mirabilite, etc.
제품 설계, 제조 표준
:
1
、
근거
JB/T447-1992
《수평식 피스톤 원료 추출 원심분리기 기술 조건》.
、
JB/T4063-1991
침대
식 피스톤 추재 원심 기종식 및 기본 파라미터"등 표준 설계 및 제조,
GB/T19001-2000idt
ISO9001-2000
표준 품질 체계 진행.
2
、
제품 검사 기술 및 수단:
호남성 상담원심분리기유한공사에 따르면
품질 보증 안내서
제
4.11
검측, 측량 및 시험 설비의 제어는 제품을 검측한다.
제품 설계, 제조 표준
:
1
、
근거
JB/T447-1992
《수평식 피스톤 원료 추출 원심분리기 기술 조건》.
、
JB/T4063-1991
침대
식 피스톤 추재 원심 기종식 및 기본 파라미터"등 표준 설계 및 제조,
GB/T19001-2000idt
ISO9001-2000
표준 품질 체계 진행.
2
、
제품 검사 기술 및 수단:
호남성 상담원심분리기유한공사에 따르면
품질 보증 안내서
제
4.11
검측, 측량 및 시험 설비의 제어는 제품을 검측한다. 제품 설계, 제조 표준: 1. JB/T447-1992, JB/T4063-1991, 등 표준 설계와 제조에 따라 GB/T19001-2000idt ISO9001-2000 표준 품질 체계에 따라 진행한다. 2. 제품검측기술 및 수단: 호남성 상담휘황한 원심분리기기계제조유한회사"품질보증수첩"제3.9 검측, 측량 및 시험설비의 통제에 따라 제품을 검측한다.
특별 힌트: 1. 기술 매개 변수는 생산 업체의 설명서를 기준으로 한다. 2. 상담할 때, 고객이 재료 특성 파라미터 및 작업 상황 조건 요구를 상세하게 알려주십시오. l 필터 간격 너비 선택 범위: 0.1-0.4mm. l GMP 사양에 따라 설계, 제조할 수 있습니다. |
||||||||||||||||||||||||||||||||||||||||||||||||